Headset Comparison

HS50 Vs. Cloud Revolver

Share
Refesh Empty
HS50 Cloud Revolver

Specification: 

Software: 
Weight (grams): 376g
Channels: 2
Connecton Type: 3.5mm, Y-adapter (female 4-pole 3.5mm to dual male 3-pole)3.5mm plug (4 pole) + Audio Control Box - 3.5mm stereo and mic plugs
Cable Length: 1m + Audio Control Box (2m)
Wireless: 
Battery: 

Lighting: 

Colour Options: 
Lighting Effect: 

Driver: 

Diameter: 50mm neodymium50mm
Impedance: 32k Ohms @ 1 kHz30 Ohms
Frequency Response: 20Hz - 20 kHz12Hz - 28,000 Hz
Max. input power: 
Sensitivity at 1KHz: 104.5dBSPL/mW at 1kHz

Microphone: 

Directivity: Unidirectional noise cancelling Uni-directional, Noise-cancelling, Electret condenser
Impedance: 2.0k Ohms
Sensitivity at 1KHz: -40dB (+/-3dB)-40dBV (0dB=1V/Pa,1kHz)
Frequency Response: 100Hz to 10kHz50Hz-18,000 Hz
Signal-to-Noise Ratio: 
Capsule Size: 
Also compared to:Also compared to:


HS50


The HS50 by Corsair, which uses a 50mm neodymium driver. It uses a 3.5mm, Y-adapter (female 4-pole 3.5mm to dual male 3-pole) connection This delivers a frequency response of 20Hz - 20 kHz. It also has a Unidirectional noise cancelling microphone with a frequency response of 100Hz to 10kHz and a sensitivity of -40dB (+/-3dB).

Cloud Revolver


The Cloud Revolver by Hyper X is a 2 channel gaming headset, which uses a 50mm driver. It uses a 3.5mm plug (4 pole) + Audio Control Box - 3.5mm stereo and mic plugs connection with a 1m + Audio Control Box (2m) cable. This delivers a frequency response of 12Hz - 28,000 Hz and a sensitivity of 104.5dBSPL/mW at 1kHz. It also has a Uni-directional, Noise-cancelling, Electret condenser microphone with a frequency response of 50Hz-18,000 Hz and a sensitivity of -40dBV (0dB=1V/Pa,1kHz). And only weighs in at 376g.