Headset Comparison

Audio-Technica ATH-AG1 Vs. Audio-Technica ATH-PDG1

ATH-AG1 ATH-PDG1
ATH-AG1
ATH-PDG1

Specification: 

Software: 
Weight (grams): 310 g (without cord)225 g (without cord)
Channels: 2
Connecton Type: 3.5mm mini stereo, gold-plated3.5 mm
Cable Length: 1.0m, USB adapter, 2.0m extension cable3 cables: 1.2m boom mic cable, 1.2m smartphone cable and 2.0m extension
Wireless: 
Battery: 

Lighting: 

Colour Options: 
Lighting Effect: 

Driver: 

Diameter: 53 mm, Bobbin-wound CCAW voice coils40 mm
Impedance: 38 ohms39 ohms
Frequency Response: 5 - 35,000 Hz20 - 20,000 Hz
Max. input power: 1,000 mW1300 mW
Sensitivity at 1KHz: 100 dB/mW92 dB/mW

Microphone: 

Directivity: Unidirectional, CondenserOmnidirectional - Condenser
Impedance: 
Sensitivity at 1KHz: -46.5 dB (0dB=1V/Pa,1kHz)-40 dB (0dB=1V/Pa, 1kHz)
Frequency Response: 100 - 12,000 Hz100 - 10,000 Hz
Signal-to-Noise Ratio: 
Capsule Size: 
Also compared to:Also compared to:


ATH-AG1


The ATH-AG1 by Audio-Technica is a 2 channel gaming headset, which uses a 53 mm, Bobbin-wound CCAW voice coils driver. It uses a 3.5mm mini stereo, gold-plated connection with a 1.0m, USB adapter, 2.0m extension cable cable. This delivers a frequency response of 5 - 35,000 Hz and a sensitivity of 100 dB/mW. It also has a Unidirectional, Condenser microphone with a frequency response of 100 - 12,000 Hz and a sensitivity of -46.5 dB (0dB=1V/Pa,1kHz). And only weighs in at 310 g (without cord).

ATH-PDG1


The ATH-PDG1 by Audio-Technica, which uses a 40 mm driver. It uses a 3.5 mm connection with a 3 cables: 1.2m boom mic cable, 1.2m smartphone cable and 2.0m extension cable. This delivers a frequency response of 20 - 20,000 Hz and a sensitivity of 92 dB/mW. It also has a Omnidirectional - Condenser microphone with a frequency response of 100 - 10,000 Hz and a sensitivity of -40 dB (0dB=1V/Pa, 1kHz). And only weighs in at 225 g (without cord).