Headset Comparison

ATH-PDG1 Vs. ATH-PG1

Share
Refesh Empty
ATH-PDG1 ATH-PG1

Specification: 

Software: 
Weight (grams): 225 g (without cord)245 g (without cord)
Channels: 
Connecton Type: 3.5 mm3.5 mm
Cable Length: 3 cables: 1.2m boom mic cable, 1.2m smartphone cable and 2.0m extension3 detachable cables: 1.2 m boom mic cable, 1.2 m smartphone cable and 2.0 m extension
Wireless: 
Battery: 

Lighting: 

Colour Options: 
Lighting Effect: 

Driver: 

Diameter: 40 mm44 mm - Closed-back dynamic
Impedance: 39 ohms38 ohms
Frequency Response: 20 - 20,000 Hz20 - 20,000 Hz
Max. input power: 1300 mW1,300 mW
Sensitivity at 1KHz: 92 dB/mW96 dB/mW

Microphone: 

Directivity: Omnidirectional - CondenserOmnidirectional - Condenser
Impedance: 
Sensitivity at 1KHz: -40 dB (0dB=1V/Pa, 1kHz)-40 dB (0dB=1V/Pa, 1kHz)
Frequency Response: 100 - 10,000 Hz100 - 10,000 Hz
Capsule Size: 
Signal-to-Noise Ratio: 
Also compared to:Also compared to:

ATH-PDG1


The ATH-PDG1 by Audio-Technica, which uses a 40 mm driver. It uses a 3.5 mm connection with a 3 cables: 1.2m boom mic cable, 1.2m smartphone cable and 2.0m extension cable. This delivers a frequency response of 20 - 20,000 Hz and a sensitivity of 92 dB/mW. It also has a Omnidirectional - Condenser microphone with a frequency response of 100 - 10,000 Hz and a sensitivity of -40 dB (0dB=1V/Pa, 1kHz). And only weighs in at 225 g (without cord).

ATH-PG1


The ATH-PG1 by Audio-Technica, which uses a 44 mm - Closed-back dynamic driver. It uses a 3.5 mm connection with a 3 detachable cables: 1.2 m boom mic cable, 1.2 m smartphone cable and 2.0 m extension cable. This delivers a frequency response of 20 - 20,000 Hz and a sensitivity of 96 dB/mW. It also has a Omnidirectional - Condenser microphone with a frequency response of 100 - 10,000 Hz and a sensitivity of -40 dB (0dB=1V/Pa, 1kHz). And only weighs in at 245 g (without cord).