Headset Comparison

ATH-PG1 Vs. PC 350 SE

Share
Refesh Empty
ATH-PG1 PC 350 SE

Specification: 

Software: 
Weight (grams): 245 g (without cord)312 g
Channels: 
Connecton Type: 3.5 mm2 x 3.5 mm for desktop/laptop
Cable Length: 3 detachable cables: 1.2 m boom mic cable, 1.2 m smartphone cable and 2.0 m extension3m
Wireless: 
Battery: 

Lighting: 

Colour Options: 
Lighting Effect: 

Driver: 

Diameter: 44 mm - Closed-back dynamic38 mm, Nd magnet
Impedance: 38 ohms150 ohms
Frequency Response: 20 - 20,000 Hz10 Hz - 26000 Hz
Max. input power: 1,300 mW
Sensitivity at 1KHz: 96 dB/mW108 dB

Microphone: 

Directivity: Omnidirectional - CondenserNoise Cancelling
Impedance: 
Sensitivity at 1KHz: -40 dB (0dB=1V/Pa, 1kHz)-38 dBV at 94 dBSPL
Frequency Response: 100 - 10,000 Hz50 - 16 000 Hz
Signal-to-Noise Ratio: 
Capsule Size: 
Also compared to:Also compared to:

ATH-PG1


The ATH-PG1 by Audio-Technica, which uses a 44 mm - Closed-back dynamic driver. It uses a 3.5 mm connection with a 3 detachable cables: 1.2 m boom mic cable, 1.2 m smartphone cable and 2.0 m extension cable. This delivers a frequency response of 20 - 20,000 Hz and a sensitivity of 96 dB/mW. It also has a Omnidirectional - Condenser microphone with a frequency response of 100 - 10,000 Hz and a sensitivity of -40 dB (0dB=1V/Pa, 1kHz). And only weighs in at 245 g (without cord).

PC 350 SE


The PC 350 SE by Sennheiser, which uses a 38 mm, Nd magnet driver. It uses a 2 x 3.5 mm for desktop/laptop connection with a 3m cable. This delivers a frequency response of 10 Hz - 26000 Hz and a sensitivity of 108 dB. It also has a Noise Cancelling microphone with a frequency response of 50 - 16 000 Hz and a sensitivity of -38 dBV at 94 dBSPL. And only weighs in at 312 g.