Roccat Renga Vs. Roccat Vire
|
 |
 |
|
Renga
| Vire
|
| Specification: | | |
| Software: | | |
| Weight (grams): | 210g (Headset only) | |
| Channels: | | 2 |
| Connection: | 3.5mm | 3.5mm |
| Cable Length: | 2.5m | 1.2m + 1.3m PC Adapter + 17cm Laptop Adapter |
| Wireless: | | |
| Battery: | | |
| Lighting: | | |
| Colour Options: | | |
| Lighting Effect: | | |
| Driver: | | |
| Size: | 50mm - Neodymium magnet | 14.2mm |
| Type: | | |
| Impedance: | 32Ohms | 32Ohms |
| Frequency Response: | 20?20000Hz | 18~22,000Hz |
| Max. input power: | | 5mW |
| Sensitivity at 1KHz: | 110dB | 105 +/- 3dB |
| Microphone: | | |
| Directivity: | omni-directional | omni-directional |
| Impedance: | 2.2kOhms | 2.2KOhms |
| Sensitivity at 1KHz: | -52dB | -38 +/- 3dB |
| Frequency Response: | | |
| Signal-to-Noise Ratio: | | |
| Capsule Size: | | |
| Detachable: | | |
| Also compared to: | Also compared to: |
Renga
The Renga by Roccat, which uses a 50mm - Neodymium magnet driver. It uses a 3.5mm connection with a 2.5m cable. This delivers a frequency response of 20?20000Hz and a sensitivity of 110dB. It also has a omni-directional microphone and a sensitivity of -52dB. And only weighs in at 210g (Headset only).
Vire
The Vire by Roccat is a 2 channel gaming headset, which uses a 14.2mm driver. It uses a 3.5mm connection with a 1.2m + 1.3m PC Adapter + 17cm Laptop Adapter cable. This delivers a frequency response of 18~22,000Hz and a sensitivity of 105 +/- 3dB. It also has an omnidirectional microphone and a sensitivity of -38 +/- 3dB.
