Razer Hammerhead Pro Vs. Razer Hammerhead Pro v2
|
 |
 |
|
Hammerhead Pro
| Hammerhead Pro v2
|
| Specification: | | |
| Software: | | |
| Weight (grams): | 12.5 | 19.6 g |
| Channels: | 2 | 2 |
| Connection: | 3.5 mm Combined Jack (Headphone and Mic) | 3.5 mm, angled gold-plated |
| Cable Length: | 1.3 m | 1.3 m |
| Wireless: | | |
| Battery Type: | | |
| Battery Life: | | |
| Lighting: | | |
| Colour Options: | | |
| Lighting Effect: | | |
| Driver: | | |
| Size: | 9 mm, with Neodymium Magnets with CCAW | 10 mm, Neodymium magnets |
| Type: | | |
| Impedance: | 16 Ohms | 32 Ohms |
| Frequency Response: | 20 - 20,000 Hz | 20 Hz - 20 KHz |
| Max. input power: | 1mW @ 126 mV | 5 mW max |
| Sensitivity at 1KHz: | 106 +/- 3 dB | 102 +/- 3 dB |
| Microphone: | | |
| Directivity: | Omni-Directional | Omnidirectional |
| Impedance: | | |
| Sensitivity at 1KHz: | -42dB +/- 3dB | -45 +/- 3 dB |
| Frequency Response: | 50Hz - 10kHz | 50 - 10,000 Hz |
| Signal-to-Noise Ratio: | 55 dB | > 55 dB |
| Capsule Size: | | |
| Detachable: | | |
| Also compared to: | Also compared to: |
Hammerhead Pro
The Hammerhead Pro by Razer is a 2 channel gaming headset, which uses a 9 mm, with Neodymium Magnets with CCAW driver. It uses a 3.5 mm Combined Jack (Headphone and Mic) connection with a 1.3 m cable. This delivers a frequency response of 20 - 20,000 Hz and a sensitivity of 106 +/- 3 dB. It also has a Omni-Directional microphone with a frequency response of 50Hz - 10kHz and a sensitivity of -42dB +/- 3dB. And only weighs in at 12.5.
Hammerhead Pro v2
The Hammerhead Pro v2 by Razer is a 2 channel gaming headset, which uses a 10 mm, Neodymium magnets driver. It uses a 3.5 mm, angled gold-plated connection with a 1.3 m cable. This delivers a frequency response of 20 Hz - 20 KHz and a sensitivity of 102 +/- 3 dB. It also has a Omnidirectional microphone with a frequency response of 50 - 10,000 Hz and a sensitivity of -45 +/- 3 dB. And only weighs in at 19.6 g.
