The Hammerhead v2 by Razer is a 2 channel gaming headset, which uses a 10 mm, Neodymium magnets driver. It uses a 3.5 mm, angled gold-plated connection with a 1.3 m cable. This delivers a frequency response of 20 Hz - 20 KHz and a sensitivity of 102 +/- 3 dB. And only weighs in at 18.4 g.
Experience superior acoustic clarity and improved bass performance through the upgraded extra-large 10 mm dynamic drivers, over 20% larger than the original Razer Hammerhead, featuring an optimized inner acoustics chamber.
Specification | |
| Software | |
| Weight (grams) | 18.4 g |
| Channels | 2 |
| Connecton Type | 3.5 mm, angled gold-plated |
| Cable Length | 1.3 m |
| Wireless | |
| Battery | |
Lighting | |
| Colour Options | |
| Lighting Effect | |
Driver | |
| Diameter | 10 mm, Neodymium magnets |
| Impedance | 32 Ohms |
| Frequency Response | 20 Hz – 20 KHz |
| Max. input power | 5 mW max |
| Sensitivity at 1KHz | 102 +/- 3 dB |
Microphone | |
| Directivity | |
| Impedance | |
| Sensitivity at 1KHz | |
| Frequency Response | |
| Signal-to-Noise Ratio | |
| Capsule Size | |
